LM3875T/NOPB【PDF 17/20 页】56 W, 1 CHANNEL, AUDIO AMPLIFIER, PZFM11

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录39248

13页 14页 15页 16页 [17页]18页 19页 20页

External Components Description

(Figure 1 and Figure 2)

Components

Functional Description

Acts as a volume control by setting the voltage level allowed to the amplifier’s input terminals.

Provides DC voltage biasing for the single supply operation and bias current for the positive input terminal.

Provides bias filtering.

Provides AC coupling at the input and output of the amplifier for single supply operation.

Prevents currents from entering the amplifier’s non-inverting input which may be passed through to the load

upon power-down of the system due to the low input impedance of the circuitry when the under-voltage

circuitry is off. This phenomenon occurs when the supply voltages are below 1.5V.

Reduces the gain (bandwidth of the amplifier) at high frequencies to avoid quasi-saturation oscillations of the

output transistor. The capacitor also suppresses external electromagnetic switching noise created from

fluorescent lamps.

Inverting input resistance to provide AC Gain in conjunction with R

f1.

*Ci

Feedback capacitor. Ensures unity gain at DC. Also a low frequency pole (highpass roll-off) at:

c = 1/(2

π Ri Ci).

Feedback resistance to provide AC Gain in conjunction with Ri.

10.

At higher frequencies feedback resistance works with C

f to provide lower AC Gain in conjunction with Rf1 and

Ri. A high frequency pole (lowpass roll-off) exists at:

c =[Rf1 Rf2](s+1/Rf2 Cf]/[(Rf1 +Rf2)(s+1/Cf (Rf1 +Rf2))].

11.

Compensation capacitor that works with R

f1 and Rf2 to reduce the AC Gain at higher frequencies.

12.

Works with C

SN to stabilize the output stage by creating a pole that eliminates high frequency oscillations.

13.

Works with R

SN to stabilize the output stage by creating a pole that eliminates high frequency oscillations.

= 1/(2

πR

SN CSN).

14.

Provides high impedance at high frequencies so that R may decouple a highly capacitive load and reduce the

Q of the series resonant circuit due to capacitive load. Also provides a low impedance at low frequencies to

short out R and pass audio signals to the load.

15.

16.

Provides power supply filtering and bypassing.

*Optional components dependent upon specific design requirements. Refer to the Application Information section for more information.

OPTIONAL EXTERNAL COMPONENT INTERACTION

Although the optional external components have specific

desired functions that are designed to reduce the bandwidth

and eliminate unwanted high frequency oscillations they may

cause certain undesirable effects when they interact. Inter-

action may occur for components whose reactances are in

close proximity to one another. One example would be the

coupling capacitor, C

C, and the compensation capacitor, Cf.

These two components act as low impedances to certain

frequencies which will couple signals from the input to the

output. Please take careful note of basic amplifier compo-

nent functionality when designing in these components.

The optional external components shown in Figure 2 and

described above are applicable in both single and split volt-

age supply configurations.

LM3875

www.national.com

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式